![]() PC screen only: The content is displayed on the computer screen instead of the connected display.You can also change the projection mode on the Project screen. The content on the computer screen will then be projected to the connected display.Press Win + K and select the name of the wireless display or projector from the Available displays list to connect it to your computer.If it does not, please follow the instructions below that pertain your laptop's operating system.Follow the user guide to set up the device, or contact the manufacturer's customer service for assistance. After your desktop has loaded, your laptop image should project. In DCS rooms where the VGA and HDMI cables are not attached to the system, you will need to connect the other end of this cable to the system jack. If you are using a HDMI or VGA adapter, plug the adapter into your laptop and connect the provided cable to the other end of the adapter. Connect the VGA or HDMI cable to your laptop's VGA or HDMI port.Turn on the system and select the appropriate button for laptop.If your laptop does not have a VGA or HDMI port, you will need to purchase an adapter that allows you to connect one of these two cables to your laptop. Newer laptops may not have a VGA or HDMI port. To see if your room also has a VGA input, click on "Classroom Features" and check "Additional Items." To see if your classroom has a data projector, search for the room and click on the "Technology" tab. The VGA port on a laptop consists of three rows of five holes. Some older systems may also have a VGA cable that may be used to connect a laptop to the projector. Videoconference, Streaming, & Recording SupportĪll classrooms equipped with the Digital Classroom Systems have HDMI inputs that may also be used to project from laptops.Teaching in an Immersive Synchronous Lecture Hall.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |